2019 Shannons Melbourne Summer Classic Auction
Lot
56

1937 Bentley 4¼ Litre Derby Park Ward Razor Edge Pillarless Saloon

PASSED IN

Passed In

Specifications

Engine 4257cc in-line six-cylinder
Gearbox Four-speed manual
Body Work Saloon
Colour Two-tone Brown
Interior Tan
Trim Leather
Wheels Hubcaps over wire wheels
Brakes Drum/drum

Vehicle Report

Description

Following the takeover of Bentley Motors by Rolls-Royce in 1931, the first new model built at Derby was announced just two years later; nicknamed “The Silent Sports Car”, the 3 ½-litre model is widely acknowledged as one of the finest cars made in Britain before the war. Designed around a “double dropped” ladder frame chassis with semi-elliptic springs front and rear, the new Bentley was powered by an in-line six-cylinder engine with overhead pushrod-operated valves. The cylinder block and head were cast iron while the crankcase, sump and clutch housing were all aluminium. Twin horizontal SU carburettors and a 6.5:1 compression ratio resulted in an output of 114 horsepower at 4500rpm, while the gearbox was a four-speed unit with synchromesh on third and top. The 3 ½-litre Bentley proved a favourite with British coachbuilders, the vast majority bodied by Park Ward but all the leading designers of the day contributed exceptionally attractive bespoke bodywork for wealthy clientele, including Vanden Plas, H J Mulliner, Hooper, Barker, Freestone & Webb, Gurney Nutting and James Young. Bentley updated the 3 ½-litre to become the 4 ¼-litre in early 1936, the new engine’s bore was raised to 88.5mm while the stroke remained 114mm, raising power output to 125 horsepower and lifting top speed from 90mph to 96mph. Other improvements including revised main and big end bearings, the compression ratio raised to 6.8:1, bigger valves and larger carburettors for better breathing. There was also a switch to a Borg & Beck clutch and the additional of an air-cooled dynamo. The final batch of just over 200 cars, the so-called ‘MR’ and ‘MX’ chassis, featured a completely redesigned overdrive gearbox, allowing for more relaxed cruising in top gear (the 3.64:1 ratio equated to 26mph per 1000rpm). Improvements also included a Marles cam and roller steering box, a stronger back axle and 17-inch wheels with 6.50 section tyres in place of the earlier 18-inch and 5.50 combination. A new instrument panel saw an electric clock, better lighting and repositioned dials. 

Make an Enquiry

code

Melbourne Auction Team

Christophe Boribon

Christophe Boribon
National Auctions and External Relations Manager
Phone: 03 8588 0866

Ryan Ledner

Ryan Lednar
National Auction Digital Advisor
Phone: 03 8588 0863

Rodney Hansen

Rodney 'Tiny' Hansen
Auctions Sales Advisor
Phone: 03 8588 0864

Lisa Bradford

Lisa Bradford
Auctions Sales Advisor
Phone: 03 8588 0873